Monitoring OmniSwitch BPS Components
Monitoring OmniSwitch BPS Components
The following commands have been added or modified for OmniSwitch BPS support on OS6860 switches.
Viewing General Power Supply Information
To display information on all system power supplies, including those installed in the OmniSwitch BPS
chassis, use the
show system
To display information on the OmniSwitch BPS chassis, and installed OS-BPS power supplies, use the
show powersupply bps shelf
To display the connector priority for power supplies currently installed in the OmniSwitch BPS chassis,
use the
show power-shelf bps-connector-priority
Note. For detailed information on these commands, as well as OmniSwitch BPS configuration commands,
refer to the OmniSwitch CLI Reference Guide.
page 4-26
command.
command.
command.
OmniSwitch 6860 Hardware Users Guide
OmniSwitch Backup Power Shelf/System (BPS)
May 2014