Related Manuals for Alcatel-Lucent OA5725R
Summary of Contents for Alcatel-Lucent OA5725R
- Page 1 Manual Alcatel-Lucent Enterprise OA5725R Router Installation Manual Copyright© ALU-DM595-I Version 6.3 04/2016 Alcatel-Lucent Enterprise OA5725R Router...
- Page 2 This publication is subject to change. Alcatel-Lucent Enterprise offers no warranty whatsoever for information contained in this manual. Alcatel-Lucent Enterprise is not liable for any direct, indirect, collateral, consequential or any other damage connec- ted to the delivery, supply or use of this manual.
-
Page 3: Table Of Contents
OA5725R ........4... - Page 4 Wireless WAN Interface ....... . A.5.4 Configuration Interface ....... . OA5725R Router...
- Page 5 RF LTE Specifications ....... . . RF GSM/WCDMA Specifications ......OA5725R Router...
- Page 6 Table of Contents Alcatel-Lucent Enterprise OA5725R Router...
-
Page 7: I Related Documents
Related Documents Alcatel-Lucent Enterprise I Related Documents ALU-Dm748-I Software Updating ALU-Dm781-I Cellular Interface. OA5725R Router... -
Page 8: Chapter 1 About This Guide
1 About This Guide Alcatel-Lucent Enterprise Chapter 1 About This Guide This OA5725R router installation manual contains information on how to correctly install the router in its operating environment. 1.1 Supported Devices The information provided in this installation guide only applies to the OA5725R router. - Page 9 1 About This Guide Alcatel-Lucent Enterprise Web: service.esd.alcatel-lucent.com Email: esd.support@alcatel-lucent.com OA5725R Router...
-
Page 10: Chapter 2 Oa5725R
2.1.2 Monitoring hardware The only way to monitor the OA5725R router family hardware is through the LEDs on the front panel. The LEDs provide visual information on what is happening in the router. These indicate the status of the hardware components, if there is connection or not, data flow, etc. -
Page 11: Chapter 3 Components And Power Supply
3 Components and Power Supply Alcatel-Lucent Enterprise Chapter 3 Components and Power Supply The following chapter provides information on the OA5725R router family chassis and its components. This informa- tion includes: • Components. • Assembly instructions. • Power supply. • RST button. - Page 12 The device is not connected to the DSL network. Yellow DSL connection is being established. Green The device is connected to the DSL network. Cellular interface corresponding to Green Coverage level above -90dBm. the active SIM Yellow Coverage level between -90dBm and OA5725R Router...
-
Page 13: Underside Panel
Description Slots for the accessories to attach the device to the DIN rail mount. For further in- formation on this accessory, please see section Installing a DIN rail mount ac- cessory on page 8 Label with product information OA5725R Router... -
Page 14: Upper Panel
The kit contains 2 screws to adjust the rail mount to the underside of the device. There are a set of holes on the un- derside that allow you to place the DIN rail mount in two different positions: OA5725R Router... -
Page 15: Installing The Protector
The transparent protector prevents the device connectors from being manipulated while the device is operating. The device does not come out of the package with the protector on; it is a separate piece. The following figure shows you how to attach the protector to the device: OA5725R Router... -
Page 16: Power Source
Alcatel-Lucent Enterprise Installing the transparent protector Fig. 8: 3.3 Power Source The OA5725R router family must be powered through DC voltage to 48 V DC. Note Before connecting the router, please read the following instructions carefully. Workplace. Main characteristics • The device should not be placed amongst papers, magazines or other elements that could hinder natural air circu- lation. -
Page 17: Rst Button
Use minimum wire size of 16 AWG (1.29 mm/0.051 in Ø) copper conductors. 3.4 RST Button The OA5725R routers have, on their front panel, a button that can be accessed from the outside and is labeled “RST” . This button has two functions: •... -
Page 18: Default Configuration
This configuration means you can use diverse techniques to improve the quality of the radio con- nection (valid for HSDPA, HSUPA, HSPA+ and LTE technologies). Installing an antenna in the OA5725R routers is necessary to improve the quality of the signal received and transmit- ted by the WWAN module (GPRS, UMTS, HSDPA, HSUPA, etc.). -
Page 19: Connecting Adsl/Adsl2+/Vdsl (Dsl Connector)
NFPA 70 (National Electrical Code). 3.5.3 Connecting ADSL/ADSL2+/VDSL (DSL connector) The OA5725R router has a DSL connector that allows connection to an ADSL/ADSL2+/VDSL network. It is a 4-wire female RJ11, and only the two middle ones are used for data transmission and reception. - Page 20 “micro-filter” . This device ensures that the ADSL sig- nal does not reach the telephone, and that undesired signals generated by the telephone do not interfere with the ADSL signal. A typical installation with micro-filters is shown in Fig. 14 on page 15: OA5725R Router...
-
Page 21: Connecting To The Serial Ports
Fig. 14: 3.5.4 Connecting to the serial ports The OA5725R router family can have one or various female DB9 connectors. 3.5.4.1 Console connector as serial port (CONF connector) It’s possible to convert the console port into an RS-232 asynchronous DCE serial port. This port has the following characteristics: •... -
Page 22: Chapter 4 Installing The Sim Card
Chapter 4 Installing the SIM card The OA5725R routers have Wireless WAN interfaces that may require at least one SIM card to be inserted in order to operate. There are certain services (CDMA) provided by several carriers in some countries that do not require SIM cards. -
Page 23: Procedure To Install The Sim
(4) Return the tray to its original position. (5) While pressing on the tray, push the fastening towards the direction indicated by the work LOCK so it is firmly in place. Instructions to insert the SIM in the internal tray Fig. 18: OA5725R Router... -
Page 24: Chapter 5 Compliance
5 Compliance Alcatel-Lucent Enterprise Chapter 5 Compliance 5.1 Manufacturer Information Teldat Brand Manufacturer Teldat S. A. Country Spain Postal Address Isacc Newton, 10 Parque Tecnológico de Madrid, 28760 Tres Cantos, Madrid, Spain International Phone +34 91 807 65 65 OA5725R Router... -
Page 25: Safety Warnings
5 Compliance Alcatel-Lucent Enterprise 5.2 Safety Warnings OA5725R Router... - Page 26 5 Compliance Alcatel-Lucent Enterprise To Connect To Disconnect OA5725R Router...
- Page 27 5 Compliance Alcatel-Lucent Enterprise OA5725R Router...
-
Page 28: Weee Information
Proposition 65 requires the provision of a warning to California consumers regarding products contain- ing certain chemicals: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. OA5725R Router... -
Page 29: Ec Declaration Of Conformity
In accordance to article 10 of 2014/53/EU we inform you that there may be national restrictions and requirements for authorization. The requirements for any country may evolve. Alcatel-Lucent Enterprise recommends that you check with local authorities for the latest status of their national regulations. -
Page 30: Operating Frequency
If the telephone company requests information on what equipment is connected to their lines, inform them of: (a) The telephone number that this unit is connected to, (b) The ringer equivalence number [01B] (c) The USOC jack required [RJ11C], and OA5725R Router... -
Page 31: Service Requirements
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. OA5725R Router... -
Page 32: Appendix A Technical Information
A.2 Updating the software The OA5725R routers can be updated to new releases. Please contact your distributor for further details on new re- leases. There are various ways to update one of our routers. For further information, please see manual “ALU-Dm748-I Soft- ware Updating”... -
Page 33: Connecting To The Router
A.3.1 Connecting through the local console (CONF connector) The OA5725R routers have a DB-9 female connector on the front panel known as “ CONF.” , which provides access to the device local console. In order to configure this, you must connect the “ CONF.” port to an asynchronous termin- al (or to a PC with terminal emulation). -
Page 34: Connectors
• Configure the IP terminal (normally a PC) Ethernet interface with an IP address within the range [192.168.1.2, 192.168.1.254] and with mask 255.255.255.0. E.g. 192.168.1.2, 255.255.255.0. • Connect the IP terminal Ethernet interface to any of the OA5725R router’s two first Ethernet Switch ports (LAN1..2) through an Ethernet cable (RJ45). -
Page 35: Rf Connectors
In the US, this is required by Article 820 of the NFPA 70 (National Electrical Code). A.4.4 Configuration Connector DB9 CONFIGURATION CONF A.5 Technical Specifications A.5.1 LAN Interface PROTOCOLS Ethernet (802.3) SPEED Switch 10/100 Mbps (Base T) CONNECTOR RJ45 female OA5725R Router... -
Page 36: Dsl Interface
A.5.6 Dimensions and Weight TYPE Plastic ruggedized casing with the option of DIN rail mount. LENGTH x WIDTH x HEIGHT Without protector: 230 x 186 x 50 mm With protector: 270 x 186 x 50 mm WEIGHT 650 gr OA5725R Router... - Page 37 Technical Information Alcatel-Lucent Enterprise A.5.7 Environmental Specifications AMBIENT TEMPERATURE ON: -10 °C to +60 °C OFF: -25 °C to +70 °C "Only used at altitudes under 2000m." OA5725R Router...
-
Page 38: Appendix B Radio Information
Appendix B Radio Information B.1 RF LTE Specifications The LTE equipment OA5725R-4G offers LTE, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE network connectivity over several radio frequency bands, in accordance with 3GPP Standards. This product is supplied without antennas. Choosing antennas is at the discretion of the operator, but the operator is responsible for fulfilling the local regulations. - Page 39 +26 dBm ± 1 dB B.2 RF GSM/WCDMA Specifications The GSM/WCDMA equipment OA5725R-H+ provides WCDMA, GSM, GPRS and EDGE network connectivity over several radio frequency bands, in accordance with 3GPP Standards. This product is supplied without antennas. Choosing antennas is at the discretion of the operator, but the operator is responsible for fulfilling the local regulations.