Removing Poe Power Supplies - Alcatel-Lucent OmniSwitch 6860 Hardware User's Manual

OmniSwitch Backup Power Shelf/System (BPS)

Removing PoE Power Supplies

1
When removing a power supply, first disconnect the power cord from the power source. Once the
power cord is disconnected, pull the power cord out of the power supply housing.
2
Pressing the lock tab toward the right, as shown, will free the lever. Pull the lever to release the power
supply from chassis, pull the power supply straight back and out of the chassis slot.
Note. If you are not replacing the power supply, be sure to install a blank cover panel over the empty
power supply bay.
OmniSwitch 6860 Hardware Users Guide
Lock Tab
May 2014
Disconnecting a Chassis from the OS-BPS
page 4-25