Power Supplies - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

OmniSwitch Backup Power Shelf/System (BPS)

Power Supplies

OmniSwitch Backup Power Shelf/System (BPS) power supplies are located at the front of the chassis.
Refer to page 4-2 for more information on component locations. Two system power supply bays and three
PoE power supply bays are provided.
Note. For PoE installations, a minimum of one system power supply and one PoE power supply are
required to power up a single OS-BPS.
Please note that the power supplies do not provide an on/off switch. Connecting an installed power supply
to a power source will power on the power supply. Likewise, disconnecting all installed power supplies
from a power source will power off the chassis.
AC Power Supply
Lock Tab
Air Vent
Handle
Model
Input Voltage Range
Nominal Voltage
Max. Power
Input Current
Output Rating
Operating Temperature
Storage Temperature
Humidity (Operating)
Humidity (Non-Operating)
Airflow
OmniSwitch Backup Power Shelf/System (BPS)
AC Power Supply Front Panel
OS-BPS-S (OS-PS-450W-A)
100-240VAC, 50-60Hz
115 VAC; 230 VAC
450W
8A (100-132V); 4A (180-264V)
12V@37A
0°C to 50°C
-40°C to +70°C
5% to 95% non-condensing
5% to 95% non-condensing
This power supply provides front-to-back airflow only for
OS-BPS applications. See
page 4-6 for more information.
January 2013
Power Supplies
Status LED
AC Connector
"Airflow Recommendations" on
page 4-13