Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual page 112

Disconnecting a Chassis from the OS-BPS
Removing PoE Power Supplies
1 When removing a power supply, first disconnect the power cord from the power source. Once the
power cord is disconnected, pull the power cord out of the power supply housing.
2 Pressing the lock tab toward the right, as shown, will free the lever. Pull the lever to release the power
supply from chassis, pull the power supply straight back and out of the chassis slot.
Note. If you are not replacing the power supply, be sure to install a blank cover panel over the empty
power supply bay.
page 4-24
OmniSwitch Backup Power Shelf/System (BPS)
Lock Tab
OmniSwitch Backup Power Shelf/System (BPS)
January 2013