Monitoring The Chassis - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

OmniSwitch 6850E Series Power Supplies

Monitoring the Chassis

OmniSwitches can be monitored and managed via the console port using Command Line Interface (CLI)
commands. The switches can also be monitored and managed via the Ethernet using CLI commands,
WebView, SNMP, and OmniVista.
The section below provides some examples of useful hardware-related monitoring CLI commands. Refer
to the OmniSwitch CLI Reference Guide for detailed information on all management and monitoring
commands used with the OmniSwitch.
Checking the Overall Chassis Status
To check the overall status of a chassis, including the chassis type, and current administrative and opera-
tional status, use the
-> show chassis
Chassis 1
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Admin Status:
Operational Status:
Number Of Resets:
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
Checking the Temperature Status
To check chassis temperature status, including the current temperature and configured threshold values,
use the
show temperature
-> show temperature
Temperature for chassis 1
Hardware Board Temperature (deg C)
Hardware Cpu Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Range
Temperature Danger Threshold (deg C)
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
OmniSwitch 6850E Series Hardware Users Guide
show chassis command. For example:
OS6850-48,
10/100/1000,
902274-10,
005,
439L0024,
SEP 22 2005,
POWER ON,
UP,
1
command. For example:
January 2013
Monitoring the Chassis
= 38,
= N/A,
= 30 to 72,
= 57,
= UNDER THRESHOLD,
= 72
page 3-19