Monitoring Power Over Ethernet Via Cli - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

Monitoring Power over Ethernet via CLI

Monitoring Power over Ethernet via CLI
To monitor current PoE statistics and settings, use the
displays a list of all current PoE-capable, along with the following information for each port:
• Maximum power available to the port, in milliwatts
• Actual power used by the port
• Current port status
• Power priority status
• Power on/off status
Aggregate slot and chassis management information is also displayed. This information includes:
• Maximum watts available to the corresponding slot
• Amount of power budget remaining for PoE modules
• Total amount of power remaining for additional switch functions
When entering the show lanpower command, you must include a valid slot number in the command line
syntax. For example:
-> show lanpower 1
Port Maximum(mW) Actual Used(mW)
----+-----------+---------------+-----------+---------+--------+-------
1 30000
2 30000
3 30000
4 30000
5 30000
6 30000
7 30000
8 30000
9 30000
(output truncated)
21 30000
22 30000
23 30000
24 30000
Slot 3 Max Watts 150
1 Power Supplies Available
Note. For detailed information on show lanpower command output, refer to the OmniSwitch CLI Refer-
ence Guide.
page 5-12
Status
12500 Powered On
1800 Powered On
3500 Powered On
9800 Powered On
25000 Powered On
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
OmniSwitch 6850E Series Hardware Users Guide
Managing Power over Ethernet (PoE)
show lanpower command. The command output
Priority On/Off
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Low ON
Class
0
1
2
3
4
-
-
-
-
-
-
-
-
January 2013