Omniswitch 6850E Series Stacking Specifications - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

Managing OmniSwitch 6850E Series Stacks
OmniSwitch 6850E Series Stacking
Specifications
The following table lists OmniSwitch Stacking specifications.
Models Supporting Stacking
Maximum Switches in a Stack
Default Daughter Module Mode of
6850E
CX4 Stacking Cable Lengths
SFP+ Direct Attached Stacking Cable
Lengths
Changing OS6850E Daughter Module Mode
The OmniSwitch daughter module can be set to either stacking or uplink mode. The mode must be set
according to the module installed and how the switch will be used.
Mode of 6850E Daughter Module
Stacking
Uplink
The following example shows how to change the mode to stacking using the
-> interfaces 1/25 mode stacking
WED JUL 01 18:08:29 : HSM-CHASSIS (101) info message:
+++ Ni 1 Port 25,26 are set to stackable for next boot:OK
-> reload working no rollback-timeout
OmniSwitch 6850E Series Hardware Users Guide

OmniSwitch 6850E Series Stacking Specifications

OmniSwitch 6850E
8
Stacking
30/60/150 cm
1/3/7 m
Capability
CX4 -Allows stacking with otoher 6850E.
SFP+ - Allows stacking with other OS6850E.
CX4 - Not Supported.
SFP+ - Acts as uplink ports.
January 2013
command.
interfaces mode
page 6-3