Supported Configurations - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

OmniSwitch Backup Power Shelf/System (BPS)
OmniSwitch BPS Configurations
The OmniSwitch BPS can be used to provide redundancy to the OmniSwitch 6850E in multiple
configurations as described below:

Supported Configurations

• Single stack (from 1 to 8 switches)
• 1 to 8 non-stacked switches
• Two stacks of switches (up to 4 switches each)
Unsupported Configurations
• Partial stack (only NIs are connected to OmniSwtich BPS, but not the CMM)
• A mix of stacked and unstacked switches
OmniSwitch Backup Power Shelf/System (BPS)
January 2013
OmniSwitch BPS Operation
page 4-27