Slot Numbering - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

Slot Numbering

Slot Numbering
For a stack of switches to operate as a virtual chassis, each module in the stack must be assigned a unique
slot number. To view the current slot assignments for a stack, use the
commands. The slot number is also displayed on the front panel of each switch by the LED located on the
left side of the chassis (refer to
There are two ways stacking modules are assigned slot numbers:
• Dynamic slot number assignment by the system software
• Manual slot number assignment by the user
page 6-20
"Status LEDs" on page 2-53
OmniSwitch 6850E Series Hardware Users Guide
Managing OmniSwitch 6850E Series Stacks
show ni or show module
for more information).
January 2013