Operating The Radio; Sleep Timer - Roberts R871 Manual

Operating the Radio

1. Press the "Power" button to turn on the radio.
2. Select the required waveband (SW/LW/MW/FM) with the
"Waveband" selector.
3. Use the "Shortwave" selector to switch between the 12
shortwave bands (SW1 - SW12).
4. Rotate the "Tuning" control to select the desired station.
The tuning indicator (4) will light up when the station is
correctly tuned.
5. On FM and SW the "Telescopic Aerial" should be fully
extended. Angle and rotate the telescopic aerial for best
reception. On MW and LW rotate the radio for best reception.
7. To switch off the radio press the "Power" button.

Sleep Timer

1. Press the "Sleep" button once to turn on the sleep timer. The
radio will turn on and the maximum sleep time (90 minutes)
will be shown in the display. The sleep time indicator will be
shown in the display.
2. The sleep time can be reduced in 10 minute increments by
further presses of the "Sleep" button.
3. To cancel the sleep timer press the "Power" button.
If you need any further advice, please call our
Technical Helpline on 0181 758 0338 (Mon-Fri)