Ratio Button Shortcuts; Gain Button Shortcuts; (Analog/Digital) Input (#) - Eq Page Shortcuts; Level Field Shortcuts - Zaxcom Fusion 12 User Manual

Chapter 8______________________________________________________Zaxcom Fusion User's Manual

Ratio button Shortcuts

Clicking the button the first time selects it. This allows the value to be modified by the Inc and Dec buttons.
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List

Gain button Shortcuts

Clicking the button the first time selects it. This allows the value to be modified by the Inc and Dec buttons.
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
(Analog/Digital) Input (#) – EQ page Shortcuts
ENTER key
RIGHT ARROW key – advances to the next filter band (note the green light in the buttons on the bottom of
LEFT ARROW key
UP ARROW key
o Band 1 – 3 are band filters selectable as Lo Shelf, Hi Shelf, Peaking or Off.
o Notch 1 & 2 are notch filters selectable as Off or On.
U key
L key
F key
Q key
E key
R key
BACKSPACE key
While the Entry Mode button is set to „LVL/FREQ‟, the following keys are active:
2 key – adds 0.4 to the Level field.
8 key – subtracts 0.4 from the Level field.
6 key – adds 200 to the Frequency field.
4 key – subtracts 200 from the Frequency field.

Level field Shortcuts

See: Common Data Entry Field Shortcuts List
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.

Frequency field Shortcuts

See: Common Data Entry Field Shortcuts List

Q field Shortcuts

See: Common Data Entry Field Shortcuts List
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
– alternately enables (inline) and disables (bypassed) ALL EQ settings for the current
channel. When a channel's EQ has been bypassed, the settings are still maintained until
they are specifically modified.
the page).
– advances to the previous filter band.
– changes the current band‟s filter type:
– resets the Level field of all bands of the current channel to unity (0.0), effectively
negating them.
– changes focus to the Level field.
– changes focus to the Frequency field.
– changes focus to the Q field.
– advances to the EQ Memory page.
– resets the Level, Frequency and Q fields
– advances to the EQ Memory page
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
150
{p.146}
{p.146}, with the following exception(s):
{p.146}, with the following exception(s):
{p.146}
{p.146}, with the following exception(s):