Table of Contents
Advertisement
Zaxcom Fusion User's Manual______________________________________________________Chapter 8
Time/Date page Shortcuts
Set Time button Shortcuts
See:
Common Data Entry Field Shortcuts List
LEFT/RIGHT ARROW keys – do not have any effect
BACKSPACE key
Set Date button Shortcuts
See:
Common Data Entry Field Shortcuts List
LEFT/RIGHT ARROW keys – do not have any effect
BACKSPACE key
Input Configure page Shortcuts
1 – 8 keys – equivalent to pressing the appropriate Channel button, changes to the
High Pass (#) Hz button Shortcuts
See:
Common Data Entry Field Shortcuts List
(Analog/Digital/LineLvl) Input # page Shortcuts
1 – 8 keys – the same as clicking on analog channel buttons 1 – 8.
D key
E key
B key
Delay button Shortcuts
See:
Common Data Entry Field Shortcuts List
HPF button Shortcuts
See:
Common Data Entry Field Shortcuts List
Analog Input (#) – Dynamics page Shortcuts
1 – 8 keys
ENTER key
UP/DOWN ARROW keys – cycles through the compressor buttons.
Attack button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc and Dec buttons.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
Decay button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc and Dec buttons.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
Thresh button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc and Dec buttons.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
– The cursor moves left without deleting any characters.
– The cursor moves left without deleting any characters.
{p.82} for the selected channel.
– goes to the
Analog Input (#) – Dynamics page
– goes to the
Analog Input (#) – EQ page
as the EQ key on the Mix-12.
– goes to the
Analog Input (#) – BUS page
as the BUS key on the Mix-12.
– the same as clicking on analog channel buttons 1 – 8.
– toggles the compressor on/off
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
{p.146}, with the following exceptions:
{p.146}, with the following exceptions:
{p.146}
{p.84} for the current channel.
{p.86} for the current channel.
{p.89}
for the current channel. This functions the same
{p.146}
{p.146}
{p.146}
{p.146}
{p.146}, with the following exception(s):
149
Analog Input (#) page
This functions the same
Advertisement
Table of Contents
Need help?
Do you have a question about the Fusion 12 and is the answer not in the manual?
Questions and answers