User Interface Settings Page; Page Notes; Page Level Shortcuts; Start-Up Screen Button - Zaxcom Fusion 12 User Manual

Chapter 2______________________________________________________Zaxcom Fusion User's Manual

User Interface Settings page

Page purpose:
How to get here:
(SHIFT + SETUP keys  User Interface button)
(MENU key  Setup button  User Interface button)

Page Notes

None

Page Level Shortcuts

None

Start-Up Screen button

Allows you to select the first page you see after the Fusion has been powered up:
Home Screen – See:
Cue Screen
Main Menu
My Fusion
Time Code

Hold Key Time button

Allows you to set the amount of delay before the Fusion keys repeat a character. Available values are: Off, 100
msec, 200 msec, 300 msec, 400 msec, 500 msec, 600 msec, 700 msec, 800 msec, 900 msec, 1 secs, 2
secs. If Off is selected, each individual key press will result in only action being taken, irrespective of the time the
button is pressed. Default setting: 250 msec
NOTE: Pressing and holding the MENU key when in any page eventually takes you back to the
{p.31}. When setting this button, press and hold the MENU key to evaluate the Hold Key Time setting.

False Start button

Allow Delete – Displays the Delete it button on the False Start dialog.
No delete
Alters the capability of the
of the False Start dialog, delete the false start now or has to take care of it later. It could be that Post wants to
receive all false starts. If so, selecting No delete aids you in meeting this requirement.

Default STN Edit Position button

Current note – Opens the current audio recording‟s metadata (i.e. Scene, Take, Note) for editing.
Next note
This page allows you to configure some of the Fusion‟s operations.

Figure 2-40 User Interface Settings page

Home page {p.31}
– See: Cue Mode page
– See: Main Menu page
– See: My Fusion page
– See: Timecode page
– Hides the Delete it button on the False Start dialog.
False Start dialog
– Opens the metadata that will be used during the next recording.
{p.118}
{p.35}
{p.104}
{p.50}
{p.126}. The end result is whether or not the operator can, as part
78
Home page