Use Quick Setup Wizard; Create A Connection Profile - TP-Link Archer MR600 User Manual

Chapter 4
4 1

Use Quick Setup Wizard

To set up your router with several easy steps quickly:
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Click Quick Setup, after configuring your time zone, confirm the parameters with
the information provided by your ISP in the
Note:
1. Quick Setup is not available if your SIM card is locked. Unlock your SIM card according to the prompt.
2. It is recommended to enable
Smart Connect enabled, the router's 2.4GHz and 5GHz share the same SSID (network name) and password.
3 Follow the on-screen instructions to complete the setup.
Note:
1. During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.
Once done, all your wireless devices must use the new SSID and password to connect to the router.
2. The router supports two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a
modem or your internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless
router to share the internet. Refer to
4 2

Create a Connection Profile

If your ISP settings are not detected by the router, you can create an internet connection
profile by following the steps below:
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced
Smart Connect to enjoy a seamless connection between dual-band networks. With
FAQ > Q6 for details.
> Network > Internet
Set Up Internet Connections
SIM part and click Next.
page.
13