Reset switch location: Old-style FPIII
When the fryer is full, turn the filter handle to the OFF position. (For units equipped with a rear-
flush option, position the control lever to the OFF position.) Remove the Power Shower and allow it
to drain.
7. Ensure the drain valve is fully closed. (If the drain valve is not fully closed, the controller will
display an error message or a trouble light and the fryer will not operate.) Turn the fryer ON and
allow the cooking oil/shortening to reach setpoint.
The drain handle must be closed completely to engage the
safety microswitch.
handle is not fully closed.
Reset switch location: New-style FPIII
The fryer will not operate if the drain
4-8