Frymaster H14 Series Installation & Operation Manual page 33

6. After the oil is filtered, close the drain valve
and allow the fryer to refill. Let the filter run
10 to 12 seconds after bubbles appear in the
oil to clear the lines and prevent hardening of
shortening in the lines.
The crumb tray in fryers equipped with a filter system must be emptied into a
fireproof container at the end of frying operations each day. Some food particles
can spontaneously combust if left soaking in certain shortening material.
Do not bang fry baskets or other utensils on the fryer's joiner strip. The strip is
present to seal the joint between the fry vessels. Banging fry baskets on the strip to
dislodge shortening will distort the strip, adversely affecting its fit. It is designed for
a tight fit and should only be removed for cleaning.
The filter pump is equipped with a manual reset switch in case the filter motor
overheats or an electrical fault occurs. If this switch trips, turn off power to the filter
system and allow the pump motor to cool 20 minutes before attempting to reset the
CAUTION
CAUTION
WARNING
switch (See illustrations, page 4-8).
4-7