Frymaster H14 Series Installation & Operation Manual page 29

NOTE: If changing filter paper, remove the
crumb tray and paper hold-down ring and clean
with a solution of hot water and dishwashing
detergent. Remove and discard the used filter
paper. Be careful, the oil-soaked paper may be
very hot and may cause burns. Remove the
metal filter screen and pan and clean thoroughly
using a solution of hot water and detergent,
ensuring that all breading and food particles are
removed from the pan, ensuring the pan is dried
completely. Allow the screen to dry completely
before reinstalling.
2. After verifying that the metal filter screen is in the bottom of the pan, lay a sheet of filter paper
over the top of the pan, overlapping on all sides.
3. Position the hold-down ring over the filter paper and lower the ring into the pan, allowing the
paper to fold up around the ring as it is pushed to the bottom of the pan.
4-3