Frymaster H14 Series Installation & Operation Manual page 24

C. To change from Fahrenheit to Celsius display (either side on split-pot), press the C/F Switch
1. Display (both on split-pot) will change from "xxx° F" to "xxx° C".
2. Display (both on split-pot) will change back to "xxx° F" by pressing the C/F Switch
again.
D. When the controller (either side on split-pot) has reached the setpoint temperature, the heat
indicator decimal point will go out, indicating the fryer is ready for cooking.
NOTE: The decimal point appearing between the first two numbers of the display indicates that the
element is heating.
Other indications that could be displayed on the Lighted Display:
HOT" and actual frypot temperature - shortening temperature is above 395° F (202° C) [or
HOT HOT
1. "HOT
410°F (210°C) for CE fryers], which is too hot for most fried products.
2. "P P P P
" - indicates the controller has detected a problem in the temperature measuring
ROB ROB ROB ROB
circuits, including probe.
help" - indicating latching circuit did not lock in or an internal component failure. help help
3. "help
3–14
.
,