3.5 Operating Fryers With Analog Controllers
ITEM
1
Power Supply Switch - controls power supply.
2
Power On Light - indicates when electrical power is on.
3
Temperature Control Knob - sets desired frying temperature.
4
Heating Light - indicates element is on.
5
Trouble Light - indicates malfunction of fryer control circuit or overheat condition. Reset
by turning the ON/OFF switch OFF for 30 seconds, then ON.
6
Melt Cycle Light - indicates unit is operating in melt cycle mode. Fryer will exit melt cycle
mode when shortening reaches 180°F (82°C).
7
Melt Cycle Switch - controls melt cycle operation.
2
4
5
1
3
DESCRIPTION
3–15
6
7