Frymaster H14 Series Installation & Operation Manual page 16

If the same product is being cooked in more than one basket, another product button can be
programmed to use the hold timer programmed for use with the original basket or product. Example:
Program button "3" for 7:00 minutes hold-time. Then when programming button "R" for hold time,
press Address Button "4". Both "3" and "R" will then have the same hold time of 7:00 minutes. See
below for button numbers and their assigned access numbers. All other buttons can be programmed
to use the same hold-time.
3.2.2 Split-pot
1. Activate the computer by pressing either
2. Enter the program mode by pressing the
you have pressed this switch in error and do not wish to program, press the
NOTE: You cannot program the computer while it is in the cook mode. The computer will flash
busy if cooking is in process.
3. Enter 1,6,5,0 in that sequence.
4. "SP-r" (SETPOINT) will appear in the left display. This is for setting the cooking temperature
for the right pot. The temperature previously selected will be displayed in the right display.
Enter new temperature. Press the
change the setting, press the
5. "SP-l" (SETPOINT) will appear in the left display. This is for setting the cooking temperature
in the left pot. The temperature previously selected will be displayed in the right display. Enter
new temperature. Press the
change the setting, press the
6. "SELP" (SELECT PRODUCT) will appear in the left display. Select buttons "L" through "5"
for programming the left pot; select buttons "6" through "R" for programming the right pot. Press
the product switch to be programmed.
7. SENS will appear in the left display. Refer to "Full-pot Programming", Steps 6 - 10 to program
individual product buttons.
ADDITIONAL HOLD-TIME INSTRUCTIONS
Button L 1 2 3
Address 1 2 3 4
switch to lock in temperature setting. If you do not wish to
switch.
switch to lock in temperature setting. If you do not wish to
switch.
4 5 6 7 8 9 0
5 6 7 8 9 10 11
switch.
switch. CODE will appear in the left display. If
3–6
R
12
switch again.