Stack Port Summary - Dell PowerConnect 8024 User Configuration Manual

Stack Port Summary

Use the Stack Port Summary page to configure the stack-port mode and to
view information about the stackable ports. This screen displays the unit, the
stackable interface, the configured mode of the interface, the running mode
as well as the link status and link speed of the stackable port.
NOTE:
By default the ports are configured to operate as Ethernet ports. To
configure a port as a stack port, you must change the Configured Stack Mode
setting from Ethernet to Stack.
To display the Stack Port Summary page, click System → Stack Management
→ Stack Port Summary in the navigation panel.
Figure 9-7. Stack Port Summary
160
Managing a Switch Stack