Configuring Snmpv3 - Dell PowerConnect 8024 User Configuration Manual

Community-String
-----------------
private
public
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Addr. Type Community Version UDP
------------ ---- --------- ----
192.168.3.65 Trap public
Version 3 notifications
Target Addr. Type Username
------------ ---- --------- ------- ----- -----
System Contact:
System Location:

Configuring SNMPv3

This example shows how to complete a basic SNMPv3 configuration. The
commands create a view that includes objects from the
(OID 1.3.6.1), which includes all objects on the switch.
The user named
(in other words, all objects on the switch) after supplying the appropriate
authentication credentials (secretkey).
To configure the switch:
1 Configure the view.
console#configure
console(config)#snmp-server view view_snmpv3
internet included
2 Create the group
configured in the previous step.
console(config)#snmp-server group group_snmpv3 v3
auth read view_snmpv3 write view_snmpv3
Group Name
--------------
DefaultWrite
DefaultRead
admin
has read-write privileges to all objects within the view
view_snmpv3 and specify the objects to include.
group_snmpv3 and allow read-write access to the view
IP Address
------------
All
All
Filter
Port Name
----- -----
1 162
Security UDP Filter
Level Port Name
Configuring SNMP
TO Retries
Sec
--- -------
TO Retries
Sec
--- -------
internet
MIB subtree
305