Dell PowerConnect 8024 User Configuration Manual page 306

3 Create the user
authentication credentials.
console(config)#snmp-server user admin
group_snmpv3 auth-md5 secretkey
4 Specify the IP address of the host where traps are to be sent. Packet
authentication using MD5-SHA is enabled for the traps.
console(config)#snmp-server v3-host 192.168.3.35
admin traps auth
console(config)#exit
5 View the current SNMP configuration on the switch. The output includes
the SNMPv1/2 configuration in the previous example.
console#show snmp
Community-String
-------------------- ---------------- --------- -------
private
public
Community-String
-----------------
private
public
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Addr. Type Community Version UDP
------------ ---- --------- ----
192.168.3.65 Trap public
Version 3 notifications
Target Addr. Type Username
------------ ---- --------- ------- ----- -----
192.168.3.35 Trap admin
System Contact:
System Location:
306
Configuring SNMP
admin , assign the user to the group, and specify the
Community-Access View Name IP Address
Read/Write
Read Only
Group Name
--------------
DefaultWrite
DefaultRead
Default
Default
IP Address
------------
All
All
Filter
Port Name
----- -----
1 162
Security UDP Filter
Level Port Name
Auth-NoP 162
All
All
TO Retries
Sec
--- -------
TO Retries
Sec
--- -------
15 3