Removing The Keyboard - EUROCOM N150SC Service Manual

Removing the Keyboard

1. Turn off the computer, remove the battery
2. Open it up with the LCD on a flat surface before pressing at point
special eject stick to do this) while releasing the keyboard in the direction of the arrow
3. Carefully lift the keyboard
4
board ribbon cable from the locking collar socket by using a flat-head screwdriver to pry the locking collar pins
5
away from the base (Figure
6
4. Carefully lift the keyboard
4
a.
1
2
(page 2 - 5), and bottom case
up, being careful not to bend the keyboard ribbon cable
7b).
off the computer (Figure 7c).
b.
3
c.
(page 2 - 6).
& to release the keyboard module (use the
1 2
as shown
3
. Disconnect the key-
5
4
5
6
6 6
4
Disassembly
Figure 7
Keyboard Removal
a. Eject the keyboard using
(Figure 7a).
a special eject stick to
push the keyboard out
while releasing the key-
board as shown.
b. Lift the keyboard up and
disconnect the keyboard
ribbon cable from the
locking collar socket.
c. Remove the keyboard.
5

Re-inserting the Key-
board
When re-inserting the
keyboard firstly, align the
keyboard tabs at the bot-
tom of the keyboard with
the slots in the case.

4. Keyboard
Removing the Keyboard 2 - 11