Removing The Keyboard - EUROCOM W650SC series Service Manual

Disassembly

Removing the Keyboard

Figure 2
Keyboard Removal
1. Turn off the computer, turn it over, remove the battery
2. Carefully press at point
a. Press at point 1 to un-
tool to do this -
snap LED cover module.
3. Turn the computer over, remove the unsnap LED cover module
b. Remove the LED cover
4. Remove screws
module.
5. Lift the keyboard up, being careful not to bend the keyboard ribbon cable
c. Remove the screws.
cable from the locking collar socket
d. Carefully lift the key-
board up and disconnect 6. Carefully lift the keyboard
the ribbon cable.
e. Remove the keyboard.
a.
b.
c

2. LED Cover Module
10. Keyboard
• 5 Screws
2 - 6 Removing the Keyboard
, from the bottom of the computer to unsnap the LED cover module (use the eject pin
1
Figure 2a)
- from the keyboard
3 7
(Figure
9
off the computer
10
1
2
7 6 5 4
(page 2 - 5).
from the computer
2
(Figure 2c).
. Disconnect the keyboard ribbon
8
2d).
(Figure 2e).
d.
e.
3
(Figure 2b).
8
9 9
10