Choosing Datum; Choosing User Chart To Use In Monitoring Mode - Furuno FEA-2107-BB Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2107-BB:

Table of Contents

15. User Chart Control

Choosing Datum

Selection of datum is very important, especially if you manually enter latitude-longitude positions from the control

panel or keyboard or if you use digitizer. If you only use the cursor to add and to modify waypoint locations, then

you could use any datum, although it is recommended to use native datum of the chart.

The user chart that is chosen for the monitoring mode is indicated in the UserChart field in the status bar. If

"UserChart" is red this means that the workstation is currently displaying the user chart for the planning mode. To

activate the monitoring mode and choose a user chart for the monitoring mode, do the following:

Place cursor here and

use scrollwheel to choose

desired user chart.

Fea-2107 Fea-2807