Changing Other Waypoint Data - Furuno FEA-2107-BB Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2107-BB:

Table of Contents

13. Route Planning

Dragging and dropping waypoint to new position

1. Place the cursor on Route in the status bar, click Plan to open the Plan Route dialog box then click the WP tab.

2. Check Enable changes, then put the cursor on the waypoint you want to process.

3. Press and hold down the left mouse button while rolling the trackball to move the cursor to a desired position.

Keep the button pressed down while you move the cursor and release it when the cursor is at desired position.

Drag and drop waypoint to new position (in this case waypoint number 9 is taken to a new position)

Changing other waypoint data

To change other data of a waypoint, such as name, steering mode, turning radius, min/max speed, do the following:

1. Place the cursor on a desired field and spin the scrollwheel to change data.

2. Push the scrollwheel to confirm changes.

Fea-2107 Fea-2807