Detecting Enc Coverage In S57 Chart Display - Furuno FEA-2107-BB Operator's Manual

7. Conditions Required to Replace Paper Charts
7.2

Detecting ENC Coverage in S57 Chart Display

The electronic chart system can display more than one S57 chart cell at a time. This feature is called multi-cell
display. If one S57 chart cell does not cover the whole display, the system will open more S57 chart cells for
display, if appropriate cells for the displayed area are available. The status bar shows information about S57 chart
cells displayed on the electronic chart display area. When automatic TM reset is active, the information is displayed
with reference to your ship's position. If TM reset is OFF, the information is displayed with reference to current
cursor position.
The possible indications are as follows:
"RCDS mode" is shown in red text
at the upper right-hand corner. This
means that raster chart material is
displayed on the electronic chart
display area.
7-4
Non ENC data" is shown in red text
at the upper right-hand corner. This
means that the S57 chart shown is
not official ENC material.
"
No indication" is shown at the
upper right-hand corner: This means
the S57 chart shown is official ENC
material.
"