Creating A New Route - Furuno FEA-2107-BB Operator's Manual

13. Route Planning
13.4

Creating a New Route

1.
2.
Write name of the new Route Plan
OK
To make a complete route for a voyage, do the following:
1. Place the cursor on Route in the status bar, then click the Plan button to open the Plan Route dialog box with
Route Plan menu. (If the menu does not appear, put the cursor on the triangle in the dialog box.) Choose Create
from the menu and push the scrollwheel.
2. Enter a name (max. 30 alphanumeric characters) for the route by spinning the scrollwheel to choose character
desired and confirming desired character by pushing the scrollwheel. When name is ready, click the OK button.
3. Check Enable changes in the Plan Route dialog box. Choose position of a waypoint by placing the cursor on the
location desired on the electronic chart display then pushing the left mouse button. After entering a waypoint,
edit Name, Steering mode, Radius, Channel limit and Speed (Min, Max) as appropriate in the Plan Route dialog
box. (Place the cursor on an item, spin the scrollwheel to change value then push the scrollwheel.) Do this for all
waypoints of your route.
4. Use the Alarms page to define safety contour and other specified conditions for checking the route. Choose item
from a list then click Indication (to get a visual indication), Alarm (to get the audible alarm) or Ignore (to
remove check item) button as appropriate.
5. Use the Check page to detect areas where depth is less than the safety contour or where specified conditions
exist. The ECDIS can examine chart database against planned route to make a list of alarms where a route
crosses a safety contour or specified areas used in chart alarms. To create a list of alarms, click the Start button.
6. Use the Params page to enter Estimated Time of Departure (ETD) and Estimated Time of Arrival (ETA), if you
are using Time table optimizing. Choose desired optimizing mode from the Optimize window.
To print a waypoint report, open the Plan Route dialog box, put the cursor on the triangle to show the Plan Route
menu, choose Report or Full Report from the menu then push the scrollwheel. Click the Print Text button. (If you
want to change the font size, put the cursor on the triangle, choose font size then push the scrollwheel, before
clicking the Print Text button.)
13-4
3.
4.
5.
6.