Activating Dialog Boxes On The Display - Furuno FEA-2107-BB Operator's Manual

3. ECDIS Display
Information in chart legend sidebar
For detailed information see the chapters on vector charts (S57) and raster charts (ARCS).
3.3.3

Activating dialog boxes on the display

There are several dialog boxes which can be activated by mouse-clicking over certain areas on the ECDIS display.
Place the cursor over the appropriate area then click the right or left mouse button to display the corresponding
dialog box on the ECDIS display. See the figure below to find the places and mouse button to click to get desired
dialog boxes on the display. To close a dialog box, click the X at the top right corner of the dialog box. Note that
only one dialog box may be shown at a time.
North Up TM ECDIS only
PLAN ROUTE
3-10
HDG 070.0°
SPD 1.8
(CALC) Kt
SB (POSN) 1.7 Kt
COG (POSN) 045.1°
SOG 2.0
(POSN) Kt
SET TIME
CPA 10 nm 10 min
ALARM
NAV.
QUEUE
MARKS
ARPA
Gyro 1
Gyro 2
Rate gyro (calc.)
0.0 /min
SENSORS
Suggested spd
Trial spd
Spd profile
MON.
ROUTE