Processing Waypoints - Furuno FEA-2107-BB Operator's Manual

13.4.1

Processing waypoints

Following fields and buttons can be found in the WP page.
Enable changes:
WP:
NAME:
Lat:
Lon:
Leg/°
Leg/Nm:
Str mode:
Radius/Nm:
Chl limit/m :
Spd min:
Spd max:
Insert before:
Next WP:
Delete:
Import:
Reverse:
All Visible:
Check to edit waypoints.
Note: Routes can only be modified in the North-up or Course-up mode.
Each waypoint has a number.
You can name each waypoint.
WP's latitude co-ordinate is displayed in chosen datum.
WP's longitude co-ordinate is displayed in chosen datum.
Bearing of leg
Leg's length (nm)
Define steering mode, rhumb line or great circle, for each leg.
Define turning radius for each waypoint.
Define channel limit for each leg.
Define minimum speed of ship used with a leg.
Define maximum speed of ship used with a leg.
Insert a new waypoint before the current waypoint.
Add a new waypoint after current waypoint. You can define direction and distance for
next waypoint.
Delete current waypoint.
Import new waypoints from already existing routes into your current route.
Reverse sailing order of the entire route.
Center line, channel borders, WP marks and leg marks are made visible on top of the
electronic chart.
13. Route Planning
13-5