14.10 Route Monitoring Alarms - Furuno FEA-2107-BB Operator's Manual

14. Route Monitoring

14.10 Route Monitoring Alarms

The following alarms are related to route monitoring.
2052 Route: Illegal ETA WP: Appears when the system cannot use the chosen ETA waypoint. The reason might
be corrupted or missing route file.
2053 Route: Illegal To WP: Appears when the system cannot use the chosen "To WP". The reason might be
corrupted or missing route file.
2054 Route: Illegal final WP: Appears when the system cannot use the chosen final waypoint. The reason might be
corrupted or missing route file.
2060 Route: WP change disabled: Appears when you try to change next or final waypoint while the system is in
automatic route steering. Leave automatic route steering and change the waypoint.
2063 Route: Choose disabled: Appears when the you try to choose a new route for route monitoring while the
system is in automatic route steering. Leave automatic route steering and choose a new route.
2064 Route: Cancel disabled: Appears when you try to cancel current monitored route while the system is in
automatic route steering. Leave automatic route steering and cancel the current route.
2454 Route: End reached: Appears when your ship passes the last waypoint. The system cancels current route
monitoring. Normally this alarm only appears when alarm 2458 is left unacknowledged.
2457 Route: Outside chl limits alarm: Appears when your ship is outside the monitored channel.
The following alarms are related to route monitoring when automatic route steering is not used:
2451 Route: WP approach alarm: Appears when your ship is "x" minutes of the wheel over point of the next
waypoint, "x" being the time specified.
2458 Route: Last WP approach alarm: Appears when your ship arrives "x" minutes from the last waypoint, "x"
being the time specified. Acknowledgement of this alarm cancels current route monitoring.
14-12