Eta (Estimated Time Of Arrival) - Furuno FEA-2107-BB Operator's Manual

14.9

ETA (Estimated Time Of Arrival)

Estimated time of arrival to a waypoint is calculated by the ECDIS. The operator can choose waypoint number and
speed profile for calculation in the Monitoring page of the Monitor Route dialog box.
To WP:
Indicates approaching "TO WP".
ETA WP:
Indicates waypoint number of special ETA waypoint and estimated time and distance to it.
Final WP:
Indicates waypoint number of final waypoint and estimated time and distance to it.
Monitored route is optimized
using "Max Speed".
Speed profile:
There are three calculation strategies:
•
Plan: The system calculates with optimization made in route planning.
•
Trial: You can enter speed to test ETAs with different speeds.
•
Current: The system calculates ETAs using average speed of last five minutes. Note that if Speed profile is
chosen as Current, your ship average speed (i.e., speed for calculation) the Trial speed box replaces the Average
Speed box.
12
04 Oct 04 18:58
Suggested spd
Spd profile
14. Route Monitoring
14-9