Modes Of User Charts - Furuno FEA-2107-BB Operator's Manual

15. User Chart Control
15.1.2

Modes of user charts

A user chart can be chosen for the monitoring mode, which means that it is displayed on connected ARPA radar
display and it can be used in chart alarm calculation. Another user chart mode modifies the user chart planning
mode. In the planning mode, a user chart is only displayed on the chart radar display; it is not displayed on the
connected ARPA radar nor is it used in chart alarm calculation. It is possible to have both the monitored and
planned user chart at the same time if separate plan and monitor units are used. Eventually the monitored and
planned user charts copy the operation of monitored and planned routes. Below is an example how to know which
user chart is used for monitoring mode and which one is used in planning mode.
North Up TM ECDIS only
The UserChart field in the status bar always shows the name of the user chart chosen for the monitoring mode. If the
user chart displayed on the ECDIS is the monitored user chart, then the text "UserChart" is black (or white
depending on color scheme). If the user chart displayed on the ECDIS is the planned user chart, then the text
"UserChart" is in red. The name of the planned user chart is only available in the planning mode dialog box.
15-2
HDG 070.0°
SPD 1.8
(CALC) Kt
SB (POSN) 1.7 Kt
COG (POSN) 045.1°
SOG 2.0
(POSN) Kt
Posn true