Activating Own Ship Check - Furuno FEA-2107-BB Operator's Manual

11. Chart Alarms
11.4

Activating Own Ship Check

Calculation of your ship predicted movement area is done using watch sector from your ship's position. Sector size
is defined by time and angle. To set them, do the following:
The figure below and on the next page shows how a watch sector is displayed on the ECDIS display.
North Up TM
ECDIS only
11-8
1. Spin the scrollwheel to show Menu/Info/Chart menu in the mouse functions
area then push the left mouse button.
2. Roll the wheel to choose Initial Settings then push the scrollwheel.
3. Place the cursor in the Initial Settings dialog box to show the menu
displayed at left.
4. Roll the scrollwheel to choose Chart Alarm parameters from the menu then
push the scrollwheel.
5. Click the Parameters tab.
Alarms
Note! Distance limit is 20nm
6. Set the sector time and sector angle as appropriate.
7. Click the X at the top right corner to close the dialog box.
HDG 070.0°
SPD 1.8
(CALC) Kt
SB 1.7
(POSN) Kt
COG 045.1°
(POSN)
SOG 2.0
(POSN) Kt
CPA 10 nm 10 min