Standby Mode; Switching Standby Mode On And Off - Furuno FEA-2107-BB Operator's Manual

5.

Standby Mode

5.1

Switching Standby Mode ON and OFF

The standby mode deactivates the audible alarms from the ECDIS. Use it while in harbour or other similar situation
where use of the ECDIS is not required. To switch the Standby mode ON, do as shown in the procedure below.
When you switch Standby mode ON, Human Interface, ARCS and S57 drawing processes are automatically
restarted.
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions
area then push the left mouse button.
2. Spin the scrollwheel to choose Initial Settings then push the scrollwheel.
3. Place the cursor on the triangle inside the Initial Settings dialog box, and the
menu shown left appears.
4. Choose Standby then push the scrollwheel.
5. The following window appears at the top of the ECDIS display to indicate that
audible alarms are switched off.
To switch Standby mode OFF, that is, return to normal operation, choose "BACK
TO NORMAL MODE" with the cursor then push the left mouse button.
.
5-1