Permobil C500 Service Manual page 27

4. Insert a screw to align the parts. Attach the
rubber seal with the drainage hole down.
Be attentive to the position of the wheel lock
release lever; fit the wheel lock so that the
wheel lock release lever is aligned with the
motor's cable bracket. Now fit the magnetic
wheel lock using the three screws.
5. Refit the shock
see page. 18.
6. Connect the magnetic wheel lock's electrical
connection; see fig.
7. Fit the wheel lock release cable; see figure 44.
8. Fit the covers; see page 7.
absorbers front end,
Align the parts with one another
using one of the attachment screws.
Fit the rubber seal.
Magnetic wheel lock
electrical connection
Fit the wheel lock release cable.
27
Magnetic wheel lock