Permobil C500 Service Manual page 43

5. The ESP module is ready programmed from
the factory. If
reprogrammed, see the technical manual of
the ESP module for full details.
WARNING
The ESP module and the Pilot+ output connection must be
correctly programmed when the wheelchair is in use. Otherwise
the wheelchair may be very difficult to maneuver, with a high risk
of accidents.
Test the way the wheelchair runs in a large open space. If the
ESP module is incorrectly installed or incorrectly programmed,
the chair may move rapidly in the wrong direction. Check
carefully that it runs correctly in response to the controls.
1
the module is to
The connections to the ESP module.
be
Programming the ESP module.
2
43
ESP module