Lights
(Accessories)
Removing the rear lights
1. Switch off the main power switch on the control
panel.
2. Put the circuit breaker in the "OFF" position. It is
accessed through a hole in the chassis cover;
see page 39.
3. Remove the seat elevator cover and the
chassis cover, see page 7.
4. Disconnect the electrical connection of the
rear light in question, it´s positioned on the rear
lights cabling on the inside of the chassis.
5. Remove the rear light in question. It is attached
with two screws; see fig.
Fitting
Fit the rear lights in the reverse order.
The rear lights are attached with two screws each.
47
Rear lights
Lights