Permobil C500 Service Manual page 23

Wheel lock release cable
Fitting
1. Fit the cable at the magnetic wheel lock first,
then at the release lever.
2. Adjust the cable sleeve length with the
adjusting screw (2) so that the cable is
sufficiently tensioned so that the wheel lock
release sensor (see figure) is actuated just
before the cable pulls the release.
3. Ensure that the wheel cannot be turned before
the wheel lock release sensor has been
actuated.
4. Ensure that the wheel can be turned when the
wheel lock release coupling is released with the
release lever.
5. Tighten the lock nut (1).
6. Refit the wheel lock release mechanism and the
covers.
Mechanism for wheel lock release.
23
Wheel lock release cable
Wheel lock release sensor.