ACG Fuse
5 mm SCREWS
JUNCTION
BOX COVER
SPARE FUSE
PAWLS
(150 A)
<Replacement>
A spare fuse is located in the junction
box.
Push two pawls, then pull out the
spare fuse.
1. Stop the engine.
2. Disconnect the battery (see page
ACG FUSE
97).
(150 A)
3. Remove the engine cover (see page
39).
4. Open the junction box cover.
5. Remove the old fuse by removing
two 5 mm screws.
6. Install a new fuse by tightening two
5 mm screws.
7. After finishing replacement, close
the junction box cover.
MAINTENANCE
99