Trimming The Outboard Motor - TOHATSU BFT 2000A Owner's Manual

OPERATION

Trimming the Outboard Motor

68°
0°
TILT ANGLE
16°
–
4°
TRIM ANGLE
0°
(VERTICAL LINE)
(when transom angle is 12°)
The BFT200A/BFT225A is equipped
with the power trim/tilt system which
can adjust the outboard motor angle
(trim/tilt angle) while cruising and
mooring. The outboard motor angle
can also be adjusted while cruising
and accelerating to obtain the
maximum speed and optimum
driveability and fuel economy.
62
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
12°
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
Press either UP or DN (down) of the
power trim/tilt switch and tilt the
outboard motor to the best position in
compliance with the cruising
conditions.
(R1 type)
POWER TRIM/TILT SWITCH (R3 type)
Press UP to
raise bow.
REMOTE
Press DN to
CONTROL
lower bow.
LEVER
POWER TRIM/TILT SWITCH
(R2 type)
(LEFT)
REMOTE
CONTROL
LEVER
The power trim/tilt system operates
when the switch is pressed, and it
stops when the switch is released.
To trim up slightly, press on UP
momentarily but securely.
To trim down slightly, press on DN
(down) in the same manner.
Single Type
REMOTE
CONTROL
LEVER
(RIGHT)
Dual Type
REMOTE
CONTROL
LEVERS