TOHATSU BFT 2000A Owner's Manual page 105

MAINTENANCE
6. Attempt to start the engine.
• If the engine fails to start, remove
the spark plugs, clean and dry the
electrodes, then reinstall the spark
plugs and attempt to start the
engine again.
• If there was water in the engine
crankcase, or the used engine oil
showed signs of water
contamination, then a second
engine oil change should be
performed after running the engine
for 1/2 hour.
• If the engine starts, and no
mechanical damage is evident,
continue to run the engine for 1/2
hour or longer (be sure the water
level is at least 100 mm (4 in)
above the anticavitation plate).
102
7. As soon as possible, take the
outboard motor to your outboard
motor dealer for inspection and
service.