Outboard Motor Installation - TOHATSU BFT 2000A Owner's Manual

INSTALLATION

Outboard Motor Installation

STERN BRACKET
WASHER (12)
BOLT (6)
1. Apply the silicone sealant (Three
Bond 1216 or equivalent) to the
outboard motor mounting holes.
2. Set the outboard motor on the boat
and secure with the bolts, washers,
and lock nuts.
Standard torque:
55 N·m (5.6 kgf·m, 41 lbf·ft)
The standard torque is given just as a
guideline. Torque of the nut can be
different according to the material of
the boat. Consult with your outboard
motor dealer.
32
WASHER (6)
NUT (12)
LIFTING EYES
Install the outboard motor
securely. Loosely mounted
outboard motor can result in
accidental loss of the outboard
motor and damage and injury to
the equipment and personnel.
Before installing the outboard motor
on the boat, hang the outboard motor
with the hoist or equivalent devise by
attaching the three lifting eyes to the
outboard.
Use the hoist which allowable load is
300 kg (661 lbs) or above.