Cruising - TOHATSU BFT 2000A Owner's Manual

OPERATION

Cruising

(R1 type)
POWER TRIM/TILT
POWER TRIM/TILT
SWITCH
SWITCH
1. Press on the DN (down) of the
power trim/tilt switch and trim the
outboard motor at the lowermost
position.
60
(R2 type)
LOWERMOST
POSITION
R3 type:
When the two outboard motors are
mounted:
1) Press on the DN (down) of the
power trim/tilt switch on the
remote control lever and trim the
outboard motors at the lowermost
position.
(R3 type)
(single type)
POWER TRIM/TILT SWITCH
POWER TRIM/
TILT SWITCH
(LEFT)
2) With the outboard motors trimmed
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the remote control lever
simultaneously.
(dual type)
(RIGHT)