Table of Contents
Advertisement
INDICATORS
The indicator lights come on and the
buzzer sounds when you turn the
ignition switch ON, allowing you to
see that they are working. If an
indicator does not light during this
test, it cannot alert you if that system
develops a problem. Have your
TOHATSU dealer check for burned-
out bulbs or other problems. Under
normal conditions, the following
occur when the ignition switch is
turned ON:
1. The ACG, Malfunction, Oil
Pressure, and Overheat indicators
light.
2. The buzzer will beep twice.
3. The Malfunction, Oil Pressure, and
Overheat indicators will go out
after the second beep.
4. The ACG indicator will go out
after the engine starts.
5. The Oil Pressure indicator will
light again after the engine starts
and will stay lit to indicate the oil
pressure is normal.
Alternator (ACG) Indicator
Tiller Handle Type
(RED)
ACG INDICATOR
(internal buzzer)
LRT Type
(side-mount control)
ACG INDICATOR
(RED)
The ACG indicator turns on and the
buzzer sounds in one-second intervals
when the charging system is faulty.
CONTROLS AND FEATURES
Malfunction Indicator
Tiller Handle Type
LRT Type
(side-mount control)
BUZZER
(RED)
MALFUNCTION
INDICATOR
(internal buzzer)
MALFUNCTION
INDICATOR
(RED)
BUZZER
35
Advertisement
Table of Contents
