MAINTENANCE
STAY
LOCK TAB
2 PIN
COUPLER
(BLUE)
DRAIN VALVE
WATER SEPARATOR BRACKET
5. Disconnect the 2 pin coupler (blue)
pushing up the lock tab.
6. Remove the 2 pin coupler (blue)
from the stay pushing up the lock
tab.
7. Remove the suspension strap from
the water separator bracket.
94
2 PIN COUPLER (BLUE)
LOCK TAB
TUBE CLIPS
FUEL TUBES
DRAIN TUBE
TUBE CLIP
SUSPENSION
STRAP
WATER SEPARATOR
STAY
8. Bind the two fuel tubes with the
tube clips to prevent the fuel
leakage, disconnect the fuel tubes.
9. Bind the drain tube with the tube
clip, disconnect the tube from the
drain valve.
10.Remove the suspension strap from
the water separator.
WATER SEPARATOR CUP
O-RING
(Replace)
SUSPENSION
STRAP
11. Remove the three screws holding
the water separator, delete the
water or deposit from the inside of
the cup.
12. Reassemble the water separator in
the reverse order of removal. Use
a new O-ring.
TIGHTENING TORQUE:
3.4 N·m (0.34 kgf·m, 2.5 lbf·ft)
SCREWS