Spare Emergency Stop Switch Clip - TOHATSU BFT 2000A Owner's Manual

CONTROLS AND FEATURES
If the emergency stop switch
lanyard is not set, the boat
might run out of control when
the operator, for example, falls
overboard and is not able to
operate the outboard motor.
For the sake of the operator's and the
passengers' safety, be sure to set the
emergency stop switch clip located at
one end of the emergency stop switch
lanyard with the emergency stop
switch. Attach the other end of the
emergency stop switch lanyard
securely to the operator.
26
(R1 type)
EMERGENCY STOP SWITCH
EMERGENCY
EMERGENCY STOP
STOP SWITCH
SWITCH CLIP
LANYARD
(R2, R3 type)
EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD

Spare Emergency Stop Switch Clip

(R1 type)
STOP
A spare emergency stop switch clip is
provided on the remote control box.
(R2, R3 type)
A spare emergency stop switch clip
STOP
does not come with R2, R3 type.
A spare emergency stop switch clip
is available from your outboard motor
dealer.
A spare emergency stop switch clip
can be stored in the tool bag (see page
81).
SPARE EMERGENCY
STOP SWITCH CLIP