Power Tilt Switch; Manual Relief Valve - TOHATSU BFT 2000A Owner's Manual

Power Tilt Switch

POWER TILT SWITCH
When you are away from the power
trim/tilt switch on the control lever
side, you can operate the power trim/
tilt switch on the outboard motor side.
The switch operation is the same as
that of the switch on the control lever
side.
Do not operate this power tilt
switch on the outboard motor while
sailing.

Manual Relief Valve

MANUAL RELIEF VALVE
POWER
(To fix)
When power trim/tilt system does not
operate because of dead battery or
faulty power trim/tilt motor, the
outboard motor can be manually
tilted up or down by operating the
manual relief valve.
To tilt the outboard motor manually,
turn the manual relief valve under the
stern bracket 1 or 2 turns
counterclockwise using a
screwdriver.
Check that no person is under the
outboard motor before carrying out
this operation because if the manual
relief valve is loosened (turned
counterclockwise) when the
outboard motor is tilted up, the
outboard motor will suddenly tilt
down.
After tilting up/down manually, close
the manual relief valve to lock the
MANUAL
(To release)
outboard motor in the position.
The manual relief valve must be
tightened securely before
operating the outboard motor or
the outboard motor could tilt when
operating in reverse.
OPERATION
67